Online detection system solution support On-line inspection is the use of soft-measurement technology for real-time detection and real-time feedback through equipment installed directly on the production line to better guide production and reduce unnecessary waste. With the continuous brewing of Industry 4.0, the field of intelligent manufacturing has become the focus of industrial development. Making manufacturing more intelligent, real-time adjustment of product manufacturing strategies to achieve a balance of quality and efficiency, making manufacturing more economical and environmentally friendly is everyone's appeal. Service Introduction The LSCAN two-dimensional laser sensor can obtain the contour data of the product through optical non-contact scanning, and transmit the data to the processing unit in real time, and adjust the control unit through the decision of the processing unit to realize on-line adjustment, which makes the result favorable. Similarly, online screening can also easily achieve the screening of defective products, sorting of product types, etc., just like adding a pair of eyes to the assembly line and the robot. For example, the sole three-dimensional scanning sensor technical solution.
The system can realize automatic scanning of products transmitted from the pipeline. When a product enters the scanning area, the three-dimensional scanning sensor automatically triggers scanning to obtain three-dimensional coordinate data of the edge contour of the product, and then automatically sprays the glue onto the subsequent station through the Ethernet. The robot sends the corrected trajectory line and the operation direction according to the preset parameters, so that the product identification process is fully automatic. |